• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Regularly inspect the window sashes for any damage, mildew and mold. You can save the cost of repairs in the future by catching the issues in the early stages before they become too much.

The sash is an internal frame that can move vertically up and down in windows that open. This article will teach you how to do a variety of simple sash repair.

Weather Stripping

Wood window sashes provide an elegant look to your home. When properly maintained, can last for many years. They can, however, get damaged or deteriorated over time due to exposure and normal wear. However, sash repair experts can restore your windows back to their original condition and keep them looking great for a longer period of time than replacement windows.

The first step for sash window repairs is addressing weather stripping, which can be found on both the sash and frame. It can cause drafts if it's worn or loose. Start by identifying the window brand and the glass manufacturer's date (etched on the glass's corner or the aluminum spacers between panes). Then, remove the sash and mark its width and height so that you can locate the appropriate weather stripping replacement to match.

Then, take it off and place it on a table to allow access to all four sides. If your sash has been double glazed window repairs near me-hung, take out the weights using their ropes that should be buried in the jamb lining. After removing the sash with the utility knife, remove the weather stripping from the old sash by hand or with a putty blade.

Once the sash has been cleared, you can replace parting stops. These are long pieces that divide the sashes. Pam prefers to replace them with standard 1/2-inch-by 3/4-inch window trim from the lumberyard. However, you can also replace them with scrap wood.

After removing the parting stops and cutting them to the desired length then apply a thin layer of glazing compound on the bottom of the sash. Smooth the compound using a putty knife, and let it dry for at least one day. When it's completely dried then apply a top coat of acrylic latex paint. This will protect the putty and give your sash a fresh appearance.

Sash Hardware

The hardware that supports window sashes is susceptible to wear and tear from age and use, and the result can be a door or window that won't open or close easily. It's a good idea to know that replacing and repair of this hardware is typically straightforward and cost-effective. If you are having trouble opening a sash, spray some oil into the jamb channel. Then, slide the sash out to see if it resolves the problem. If not, the issue is likely to be with the balance of the sash and you'll need to take out the sash to gain access to the hardware.

Sashes for windows should be able to open and close without much effort. However, this may be a challenge if the weights have been worn out or the sash-to rail meeting rail is not properly coated. This problem can be caused by a variety of reasons, such as the lack of maintenance or the wrong weight rating for the particular sash.

If the hinges on the window begin to move, this could cause the sash to drag and then hit the frame at the opposite corner (Photo 1). To resolve this issue, first make sure the sash is squarely inserted into the frame's opening and then remove it from the window. If the sash is attached to the hinge arm, remove the hinge and replace it. (Photo 2). Install the new sash (Photo 3).

Due to sagging hinges, and a general deficiency in energy efficiency, windows that are old especially in older homes, may be difficult to open and close. Many times, a few simple fixes can allow these windows to operate smoothly and help homeowners save money on their energy bills.

It is essential to have the tools needed before you begin. Begin by marking the position of the hinge channel on the frame with a pencil (Photo 1). This will allow you to position the channel in the proper location after you've completed. Remove the sash, and then remove the hardware including the parting beads (Photo 2) and the chains or cords which hold it in place. Soften any hardened putty with a heat gun set to medium and fitted with a shield to block the nozzle. Remove the old sash, and put it in a bag with a label.

Sash Weights

Sash weights can be changed to enhance the efficiency of your window sash, and also reduce energy costs. Sash weights are made of heavy iron or lead cylinders that are enclosed in a concealed cavity and connected by a rope to the movable window sash. These weights function as counterbalances and allow you to open and close the window without having to use mechanical or electrical devices. The sash weights are often neglected or ignored by homeowners and then turned into scrap when they fail. Consequently, you may need to search for replacements.

A weight from a sash that fell out of the cavity is difficult to retrieve, so you will want to find a replacement that is suitable for the. You will also require an additional piece of string, a length of the sash cord, as well as some sash pulleys to tie the new sash weights to the sash cord.

Mortise and Tenon joints can be used to join windows made of older wood. Hammers and pins can be used to take out the wood pegs that hold the components together. Most of them have a large diameter on one side and a smaller one on the other, so it is crucial to take out the smaller-diameter ones first. Sashes that were made later in the century utilized glue instead of pegs. They can be separated by cutting through the glue line with the help of a knife, and then tapping the mortised section loose with a mallet.

After the sash has been removed then you can take out the stopper on the sash and get access to the weight pocket. Usually this is accomplished by drilling a hole near the bottom of each jamb. This hole is covered with an unfinished wooden panel that can be removed to reveal the inside workings.

When the sash has been shut off and the access panel has been removed, you can remove the weight you used and replace it. First, weigh the sash to ensure that the weights you've got may not be the correct size. After the new weight is installed, run the string through the sash pulling mechanism. Then attach the string to the boxed frame, leaving a few inches of string sticking out from the head for future adjustment.

Sash Cords

Most double-hung windows of the past have a cord or chain attached to the weights that keeps the sashes level in the jamb. As time passes, these cords may break, making it difficult to raise the window. A new sash cord will give you the ability to move the sash up and down and keep it in place when it is opened.

To replace sash cords the first step is to remove the access panels from the jambs. These are usually installed by screws or nails and will require to be removed or relocated. You could use a hammer and chisel to remove them but it's best to lay down dust sheets prior to starting any work.

After removing the access panel, you can begin to work on the sash. Prise the narrow parting beads (also known as "tie rails") out of their grooves with a chisel or flat bar. It's important to take your time because they are usually stuck or nailed to the floor. If the sash remains in place, break the mortise and tenon joints with pin punch and hammer or screwdriver, then remove the wood pegs attached to each component. You should now be able to move the sash back and forth freely, although it might require oil if it feels stiff.

With the sash in an open position Take a measurement of the sash chain to extend from the pulley at the top of the jamb to the sash slot on the bottom. Cut the chain or cord and secure it as in Step 6 above. You can either use a hammer and screws or nails, but nails are less likely to cause damage.

It is best to keep the original weights if you've purchased a kit to replace the old counterbalance. They are not expensive and easy to install if purchased them at architectural salvage stores. Based on the size and shape of your Window Repair you may require one or two sashweights to keep it open.