• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Tips For Replacing a Window Handle

The replacement of the handle on your window is an easy project that can be completed in the convenience of your own home. Follow these handy tips for smooth operation and a stunning look.

Take off the screw covers from your uPVC handle to expose the screws. Take a measurement of the spindle to be sure you're getting the correct size replacement.

1. Take a measurement of the Spindle Length

It is crucial to get the spindle size right when replacing windows handles. This is because it can determine how tight or loose the handle is and whether it locks correctly in the frame of the window. The spindle is a metal shaft that connects the handle to the lock in the window frame. The spindle is available in either the standard cross-section of 8mm for industry or the older versions of 9mm. The modern industry standard is 8mm however this was not always the case so when purchasing a new handle, it is essential to verify the dimensions.

Remove the handle. This is easily done by turning the handle to the open position, then unwinding two screws that hold the handle in place (which are often concealed behind plastic caps that must be removed). Once the handle is removed, measure the distance from the base to the point at which it ends. This will provide you with the measurements needed to buy a replacement.

There are plenty of choices when it comes to selecting a new window handle from sleek chrome that blends in with a modern home, to traditional brass with a burnished finish that looks great in restored Georgian rooms or even the more quaint Tudor cottages with curled monkey tail locks! There are a lot of options, but the most important thing is to select one that complements your home's style.

Espag handles are generally fitted to Upvc handle window windows and are identical in size with 43mm centres (2 fixings). Cockspur handles can vary from 58mm to 62mm but there are replacements for both sizes. Window handles from Cadenza come in an entirely different dimension due to their angle blade that operates a multi-point lock mechanism inside the window.

Another consideration when selecting the best window handle is determining what hand you require, this is simply defined by the hand you use to open the door. Inline Espag window handles aren't hand-operated and can be used for left or right handed windows. Cranked window handles are hand-operated and are only used on windows that open in only one direction.

2. Remove the Handle

A window handle that is sagging can be frustrating, regardless of whether the handle is damaged or worn out. The good news is that you can repair the upvc door locks and handles handle by yourself. All you need is a few basic tools and a bit of time to complete the process.

You must first open the window, and then ensure that it's not locked. Then, remove the screw caps that hold the handle in position. Once these are removed, you can begin working on the removal of the handle itself.

The handle itself is fixed to a spindle inside the window frame. Based on the type the handle is secured by a screw or pin. The most commonly used handles are the inline Espagnolette and the cockspur handles. Both kinds of handles can be found on casement windows including aluminum ones. They can be locked by using keys to prevent the opening of the window from the outside or you can lock them by turning the handle clockwise.

To take the handle off, you will require a flat-bladed screwdriver. Once this is released, the handle will fall off the spindle. When the handle is removed, you'll need to measure the length of the spindle to ensure that your new handle is compatible with this measurement.

Once you have the right size, you can now put the new handle in place. It is crucial to ensure that the handle is securely fastened and that it is rotating in the correct direction (clockwise in the case of an open and counterclockwise if handle is closed). It is essential to ensure that the handle has not been installed upside down.

Then, you must replace the screw cap caps. After you've done that then you can test the handle to confirm that it functions correctly. You should also test the locking mechanism by moving the handle from the locked position, and then back to the locked position.

3. Remove the Screws

A uPVC handle is an important part of any house and is the first thing that shows signs of wear or damage. It can be caused by natural causes or from regular use and sometimes even deliberate damage by opportunistic criminals who may want to open a closed window and gain entry to your home. But, a simple fix can easily solve the problem and prevent the issue from happening again.

UPVC handles can be difficult to open if the locking mechanism isn't functioning correctly. In most cases, the issue is solved by replacing the multipoint lock instead of the entire handle and it's worthwhile to check this out since it can save you money.

After removing the old handle, you'll need to remove any screws that secured it. The screws are typically located on the inside of the handle base. You may require a screwdriver for this and it's crucial to not over tighten the screw as this could cause the handle to become loose.

You will then need to find the fixing screws or pins that hold the new handle in place. They're usually on the inside of the base of the handle. You'll need a screwdriver to remove them. If you want to, you can replace the caps on the screw and check the handle to ensure it is working correctly.

Install the handle by aligning the spindle to the cutout in the window mechanism. Then screw it in. If you're looking to replace the screws, make sure the handle is in a position that is open and that any screws are securely secured. Once this is complete you're all done and you can enjoy your new window handle. This should allow you to avoid costly window and door replacements in the future. If you'd like to get more help regarding this or any other aspect of your uPVC windows don't hesitate to get in touch with us.

4. Fit the New Handle

The procedure of replacing a damaged window handle or updating it is easy and can be accomplished in a few easy steps. Identifying the kind of window handle, measuring the length of its spindle and knowing what tools you'll require to finish the job are crucial. Always ensure the safety of your windows and tools. Be sure to follow the steps and ensure that you have a handle that is safe to use.

To begin, locate the screws that hold your window handle. Remove them while firmly gripping the handle to stop it from falling and causing an injury. Once the screws are removed, they can be placed in a safe spot to be replaced later.

After you have removed the handle, you are now able to install your new one. It is essential that the handle fits perfectly to ensure that it functions correctly and locks the window in its place. The next step is to slide the metal square to the back of the handle into the hole in your window mechanism, ensuring that it fits securely.

Once the new handle is installed, the final step is to replace the caps on the screws and test it to make sure it functions. If you aren't satisfied with the results or if the window does not open and close as it should the next step is to call our experts who will be able to assist.

The majority of homes in the UK have uPVC windows. As such, many of them will require to be replaced in the near future due to damage or wear. The procedure is simple tilt and turn window handles can be done by anyone with a bit of knowledge of DIY. It is important that the handle you select is in line with the style and size of the window. Contact our team if you are unsure about the type of handle you require. They will be able guide you through all the options.